Output filters : Sinus filters

Variable speed drives 

Altivar Process 

Option: Output filters Sinus filters

Sinus filters allow Altivar Process drives to operate with long motor cables:

• 500 m (1,640 ft) with a shielded cable
• 1,000 m (3,280 ft) with an unshielded cable

The minimum switching frequency at which sinus filters can operate is 4 kHz. This is the default value when the sinus filter function is activated on the variable speed drive. 

The output frequency must be less than 100 Hz.

At 100% load, the voltage drop is less than 8% with output frequency 50 Hz and switching frequency 2 kHz.

For applications requiring:

• Long cable runs
• Motors connected in parallel
• Submersible pumps sensitive to dv/dt
• An intermediate transformer between the drive and the motor

Read More

Output Filters : dv/dt filters

Variable speed drives
Altivar Process
Option: Output filters
dv/dt filters

Altivar Process drives with supply voltages of 200...240 V and 380...480 V operate with the following maximum motor cable lengths: 150 m/492 ft for shielded cables and 300 m/984 ft for unshielded cables. For a supply voltage of 500...690 V, maximum motor cable lengths are: 10 m/32 ft for shielded cables and 20 m/65 ft for unshielded cables.

To limit the impact of dv/dt and overvoltages in the motor, it is advisable to add an output filter if the motor insulation type does not conform to IEC 600034-25:

• For cables <50 m/164.04 ft, a dv/dt output filter
• For cables >50 m/164.04 ft, a sinus filter

Output filters are used to limit dv/dt at the motor terminals to 500 V/μs maximum for supply voltages up to 480 V, to 750 V/μs maximum for a supply voltage of 500 V, and to 1,000 V/μs maximum for a supply voltage of 690 V.

Output filters are designed to limit overvoltages at the motor terminals to less than:

• 800 V with a shielded cable 0 to 50 m (0 to 164 ft) long for a 400 V supply voltage
• 1,000 V with a shielded cable 50 to 150 m (164 to 492 ft) long for a 400 V supply voltage
• 1,500 V with a shielded cable 150 to 300 m (492 to 984 ft) long for a 400 V supply voltage (up to 500 m (1,640 ft) with an unshielded cable)
• 1,300 V for a 500 V supply voltage, cable length depending on the dv/dt filter combination
• 1,600 V for a 690 V supply voltage, cable length depending on the dv/dt filter combination

The performance of dv/dt filters will be affected if the maximum cable lengths are exceeded. For an application with several motors connected in parallel, the cable length must include all cabling. If a cable longer than that specified is used, the dv/dt filters may overheat.

The switching frequency must be less than 8 kHz.

Read More

Apa perbedaan Variable Frequency Drive (VFD) dan Variable Speed Drive (VSD) ?

• Variable Frequency Drive (VFD), merupakan pengontrol gerak (drive) yang bekerja dengan cara mengubah frekuensi dari sebuah Motor AC. VFD hanya untuk dihubungkan dan digunakan untuk Motor AC saja.
•  Variable Speed Drive (VSD), merupakan pengontrol gerak (drive) yang bekerja mengubah kecepatan motor dengan memvariasikan nilai tegangan suplai, baik drive tipe tegangan AC ataupun DC. VSD terdapat pilihan AC drive dan DC drive.

Read More

Basic Setting atau Simply Start ATV Process (ATV630)

Basic Setting atau pengaturan dasar sangat diperlukan untuk pengoperasian setiap inverter. Oleh karena itu kami memberikan sedikit pengetahuan atau cara bagaimana melakukan pengaturan sebelum anda menggunakan ATV630.

Berikut ini adalah dasar pengoperasian atau setting ATV630 :

1. Pastikan semua parameter motor atau pompa telah di inputkan pada ATV630 (berdasarkan spesifikasi motor) : => simply start => inputkan seluruh parameter motor => tekan ok
2. Cara reset jika terjadi fault (dengan nyala display merah) : => complete setting => Error warning/handling => pilih fungsi mana yang terjadi error (co: input phase loss)
3. Cara mengatur ATV default pabrik (riset) : File management => factory setting => parameter group list => pilih parameter yang ingin default pabrik /all parameter
4. Cara mengganti local atau remote : My preferences => access level=> expert (mode) Complete settng => command & references => references configuration => Ref.freq.rem.terminal => HMI command => Bumpless
5. Cara save parameter yang sudah di setting : File management => transfer config file => copy from to the drive/copy to the drive
6. Cara modifikasi parameter : Complete setting => generic function => ramp
7. Cara membuat simply start atau menu sendiri : My preferences => customization => My menu config
8. Cara screenshot display : F1 + F4
9. Cara preset speed (speed konstan) : => complete setting => generic function => preset speeds => pilih kecepatan
10. Cara menentukan batas-batas kecepatan : => complete setting => generic function => speed limits => pilih low speed/high speed

Read More

eSetup Easergy Pro

Easergy P3 software for setting and configuration

eSetup Easergy Pro offers full facilities to set up Easergy P3 Protection relays. Intuitive and simple, eSetup Easergy Pro is a user-oriented interface to assist you during the engineering, commissioning and operation of Easergy P3 protection relays. Its streamlined workflow and graphical representations has been designed to simplify your configuration process.

Link Download :

https://download.schneider-electric.com/files?p_enDocType=Software+-+Release&p_File_Name=EasergyPro_v3.0.0_Full.zip&p_Doc_Ref=eSetup_Easergy_PRO

Read More

EcoStruxure Plant Builder Setup - 4.0.18

Overview

Speed up EcoStruxure™ Plant Pre-Sales project quotation
The EcoStruxure Plant Builder is a quotation pre-sales tool that satisfies the needs of each player in the solution selling process.

It is a standalone tool that is always in line with the latest release of EcoStruxure Plant catalog.

Starting from a project specification, the tool proposes and validates a system configuration comprising:

PAC modules
devices
network
software.
It provides the complete BOM (Bill Of Material) of the full porject with pricing for project bidding, a customized system architecture drawing and a project quotation report.

Link Download :

https://schneider-electric.app.box.com/s/bxc4vrff23pav5rlkibqy1s3zd0nkmm7

Read More

EcoStruxure Machine Expert

Software for developing, configuring, and commissioning the entire machine in a single software environment - formerly known as SoMachine
EcoStruxure Machine Expert saves engineering time through intuitive machine programming with one of the most modern and powerful tool-based software concepts on the market.

https://download.schneider-electric.com/files?p_Archive_Name=ESEMACS10_INSTALLER.zip&p_Doc_Ref=ESEMACS10_INSTALLER

Read More